โ RNS 1.4.2 released https://pypi.org/project/rns/
๐ฌค rns.recipes
top
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
โ RTNode for RAK 4631 ? โ
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
Started by tukann ยท 1mo ago
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-1
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ tukann #1 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 1mo ago
Hello,
I have a WisMesh Repeater Mini lying around. It's from an older Meshtastic network.
It is a solar LoRa kit. Basically for me it is a set and forget device. I tossed it on my
roof and never have to bother about it. Works great.
So it would make a great repeater for reticulum over LoRa. That would be great to flash
it as an RTNode.
As far as I understand, for the moment RTNode only supports Heltec V4, is that right ?
Is there a place where I can follow the development ? Have news about possible new
hardware supported, specifically in my case the RAK 4631 ?
Thanks,
Tukan
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-2
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ tukann #2 โ
โ 8dab5fc052de8a96 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 1mo ago
To answer my own question :
yes, I simply followed the instructions here :
https://github.com/attermann/microReticulum_Firmware
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-3
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ p1ld7a #3 โ
โ 8279b6a997b08071 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 1mo ago
Hello,
I tested :
1. https://github.com/markqvist/RNode_Firmware
Works fine, but I can't get the sensors working (led, temperature sensor, gps, buzzer)
2. https://github.com/attermann/microReticulum_Firmware
Same as 1, but there's no need to have a Tag acting as a standalone transport node.
That said, I can't wait to see support of ethernet so I can install it on my other
RAK4631 Wismesh blocks (not the Wismesh Tags).
3. https://github.com/thatSFguy/reticulum-lora-repeater
I tested it today, and it works well. However, I think it is worth mentioning that this
firmware turns the device into a dedicated repeater. In practice, this means the device
can no longer be used as an RNode, or for other purposes, while running that firmware.
This surprised me a bit at first. I believe attermann/microReticulum_Firmware may behave
differently, but I still need to look into it in more detail.
All of them are working fine, and I am pretty sure that sensor support will come with
time.
Let me know how it goes for you!
Good luck :)
โ 1 โ 0 โค 1
โ INFO โ Identify to this node to post. How?
bottom